Seal ‘N’ Flex 1 is a low modulus, one component, Class A polyurethane sealant. When cured it will form a tough, Flexible seal capable of cyclic expansion and compression movement of 100% (+/-50%) of the original joint width
Seal ‘N’ Flex 1 is virtually unaffected by normal weathering conditions such as rain, sunlight, snow sleet, ultraviolet radiation, ozone, atmospheric contamination and pollution. Its excellent weather ability enables it to retain its original properties after years of exposure, refer to the CSIRO RILEM LONG TERM SEALANT DURABILITY STUDY DBCE Doc. 97/196 (M).
SEAL 'N' FLEX 1 is a low modulus, one component, Class A polyurethane sealant. When cured it will form a tough, flexible seal capable of cyclic expansion and compression movement of 50% (± 25%) of the original joint width.
||Non-sag, smooth thixotropic paste
|Tack free time
|Rate of cure in mm/24 hrs
||Resistant to dilute acids, alkali & some solvents Intermittent contact with diesel and petroleum.
|Elongation at break
||-40°C to 70°C
||7 days on porous substrate
||1 hr at 23°C High
||19 lineal meters with 6mm beads.
||300ml cartridge, 600ml sausage
300ml Cartridge, 600ml Sausage